Clean Water Pools

Finding the ideal above ground pool pump options is essential in setting up an efficient filtration system for your swimming pool. To have an efficient filtration system, will need to have a pool pump and filter for your above ground pool. One of the benefits of having an above ground pool is that its pump and filter are sold together as a unit. This order process makes it more economical than single pumps and filters. This write up covers the basics for choosing pumps for above ground pools according to size, horsepower, etc.

There are some considerations and options available when choosing an above ground swimming pool pump.

The primary purpose of going for the right combination of pool pump and filter is to avoid problems that could create premature malfunctions, hazards, and ineffective filtration.

Before determining the right horsepower you need, it is important to give the below factors consideration:

• The general pool size: whether small, medium, or large
• The filter type: whether sand or cartridge
• The cleaner type: pressure side, suction side, or robotic

With the right sizes, everything will work well together and significantly affect your pool’s performance. An above ground pool pump that has too much horsepower will result in excess water movement, and if you have a small pool, it could become a hazard due to the unpredictable water flow.

Steps to Follow

1. 1.Figure out the size range that your pool falls. Filter sizes are crucial to a pool’s size. A smaller pool requires a smaller filter while a larger pool requires a larger filter.

2. Determine which filter type you would prefer. There are two basic types of filters for above ground pools namely sand and cartridge. With both offering different benefits. Sand filters may be the most economical of the lot, but they require periodic back-washing. While cartridge filters are a more expensive option but offer better filtration system. Of the two choices, cartridge filters are the easiest to maintain though more costly.

3. Know the kind of cleaner you will use. Whether it is pressure side, suction side, or robotic. These cleaners effectively clean above ground pools, but they power differently. Let us take these options one after the other below.

Types of Cleaners

Pressure Side Cleaners can capture the debris conveniently and help to circulate pool chemicals and water. Pressure side cleaner utilizes the pools’ pressure side line to move the cleaner throughout the pool. This cleaning process is convenient because there is water not circulated around dead zones. Non circulated water encourages the growth of algae.

Suction Side Cleaner is not only affordable but is also the most commonly used option. A suction side cleaner draws dirt and debris by using the suction line to propel the cleaner while scrubbing the pool surface. Significant amounts of debris including leaves can clog the pipes which can lead to the damage of the filtration system.

Robotic Cleaners run independent of an above ground pool’s filter and pump system, gathering debris into a self-contained mesh bag. They may be the most efficient of all pool cleaner options because they don’t clean the same area more than once.

how long should I run my above ground pool pump?

How long should I run my pool pump really depends on the size of the pool and pump flow rate. Use pool flow rate calculator to factor the nessesary gpm needed for the size of the pool. The water needs to be turned over twice a day to meet most health code standards.