Intex 28635EG Krystal Clear Cartridge Filter Pump for Above Ground Pools 1500 GPH Pump Flow Rate 110 120V with GFCI

$63.95

Specially designed for above ground pools. For use with Intex Easy Set pool models 18′ Frame pool models 16′ or 18′ Oval Frame pool models 20′ X 12′.

SKU: B005QIYM6E Categories: , Tags: ,

Description

Buying guide

This exact ASIN is the Intex C1500 Krystal Clear cartridge filter pump, identified by part number 28635EG. It is a standalone above-ground pool pump, not a complete pool set.

  • Sizing check: the listing states it is suitable for INTEX pools up to 9,400 gallons with 1.25-inch hose fittings; confirm your pool volume and hose size before ordering.
  • Flow rates: pump flow is listed as 1,500 gph and system flow as 1,180 gph, so use the lower in-pool figure for turnover planning.
  • Cartridge type: it uses Type A filter cartridges (Item #29000E), which the listing says should be changed every two weeks.
  • Assembly: partial assembly is required; verify what accessories or hoses are supplied with your specific offer.

Source: Intex product listing


Specially designed for above ground pools. For use with Intex Easy Set pool models 18′ Frame pool models 16′ or 18′ Oval Frame pool models 20′ X 12′.Easy installation just attach hoses and plug in (Partial assembly required).System flow rate: 1 180 gph (2 839 lph). Pump flow rate: 1 500 gph (3 785 lph)Double insulated pump. Auto timer with preset 2 to 12 hour cycles.Air release valve for air trapper inside filter chamber. Sediment flush valve.Includes one easy to clean replaceable filter cartridge. For best results replace filter cartridge every 2 weeks. Replacement cartridge: Type A/C.Note: plunger valves and 1 ½” (38mm) inlet/outlet fittings not included.

Additional product information

Keep your pool water Krystal Clear and refreshing this summer with the Intex 1 500 GPH Filter Cartridge Pump! Boasting a pump flow rate of 1 500 gallons per hour and a system flow rate of 1 180 gallons per hour this pump will circulate and filter the water in your above ground pool to keep everything clean refreshing and fun. In addition the maintenance for this pump is a breeze: just the occasional cartridge rinse or swap to keep this pump running strong. This filter uses Type A filter cartridges (Item #29000E) which should be changed every couple of weeks. This pump is a must have for any above ground pool up to 18 feet in diameter see for yourself! Lastly this pump features a built in timer to set the operating time making it incredibly simple and convenient to use. NOTE: If the pump will not start at all check the GFCI outlet on the plug to ensure it has been properly reset for use and check that the GFCI is not being plugged into an extension cord. Refer to page 13 in manual (Other content) for troubleshooting steps.

Leave a reply: